How to setup ButtKicker Gamer PlusUpdated a year ago
In this guide we will go over how to setup the ButtKicker Gamer Plus. We also have a video version of this guide located here.
Start by taking the amplifier out of the box as we will start with connections.
- First plug in the power cable to the back of the amplifier.
- Next connect either the USB or the 3.5 to RCA cable from the amp to the PC. (only 1 is used
- After this we want to connect the quick release cable. The banana clip side of the cable will go into the back of the amplifier using the red and black terminals.
- You will then connect the quick release side of that cable to the transducer. This will be conjoining the 2 sides of the cable with prongs.
This would then finish the setup for connections to the ButtKicker amplifier. After this or at any point during this you can connect the Plus transducer to your rig or chair.
This will be different from rig to rig but we want to find a post or mount 1.77" or less to connect to with the clamp or you can use the 3 bolt holes to mount directly.
The next step would be to setup HaptiConnect. You can use our guide to help with that setup.